Manual Position Control

The MC-5B Micropositioning Controller from National Aperture, Inc. was designed for ease of use and effortless integration into any application. The MC-5B is a low cost, quick setup solution for those applications requiring precise position control of motorized stages. Incorporated into this all-in-one controller is a keypad/display interface, a 750mA 12V linear DC motor amplifier, single ended (TTL) A/B quadrature encoder inputs, 5 volt limit switch inputs and a serial communication interface. The MC-5B functions as seamlessly as a single axis, stand-alone system or as a multi-axis networked system, either with or without a PC. The peer to peer network architecture makes it possible for every MC-5B in a multi-axis system to control every axis in the motion system. No software development or complex wiring is required. The controllers themselves may be programmed to store and recall positions and to sequence through stored positions with looping, pausing and user/program interaction. Automation may also be driven serially from a PC or host processor.

Benefits:

• Instant "Out-of-the-Box" Motion Control
• A Low Cost, Integrated Motion Solution
• No Need to Write Additional Motion Commands
• Perfect for:
• Rapid Development
• Prototyping
• Proof-of-Concept
• Small OEM Lots Where Delivery is Critical
• Lab Development

Features:

• Control all nodes from any node on the motion network
  
• Broadcast Single or Multiple Motion Commands to one or all nodes at the same time<
  
• Configure each unit as a node on the network with a unique node number
  
• Original Settings are Retained
  
• Up to 99 MC-5B controllers can be configured on a single motion system
  
• Communicate to any node on the system through your PC's serial port