FEATURES
- 3D models available
- Ultra-Low Profile
- Large Thru-Hole
GENERAL DATA:
- Load capacity: 1.1 kg Direct Top Load
- Linear Travel: 25.4 mm
- Table Speed: 39 mm/sec
- Weight: 220 grams
- Thru Hole: 54 x 29 (mm)
GENERAL PRECISION:
- Repeatability: ± 0.5 µm
- Accuracy: ± 3.0 µm/25.4 mm
- Slider Backlash: 1 µm
Product Selector
NOTE: If viewing on a cell phone, landscape mode is recommended.
3D models available
Specifications: MM-5M
|
|||
---|---|---|---|
*Repeatability: | 1 µm | ||
*Homing Repeatability: | 1 µm | ||
*Accuracy (linearity): | ±3 µm per 25 mm of travel | ||
Straightness: | 4 µm maximum deviaton per 25 mm of travel | ||
Speed, no load (max. for std gearhead ratio): | 39 mm/second | ||
Slider Backlash: | 1 µm | ||
Gearhead Backlash: | <2 µm | ||
Resolution: | 1.56 µm/count | ||
Gearhead Ratio: | 16:1 | ||
TPI (turns per inch): | 25.4 | ||
*Encoder Conversion (resolution): | 0.49609 µm/count | ||
*Encoder resolution must be added based on
the gearhead (see Encoder Resolution Data Sheet for MTR10-10E) NOTE: Gearhead ratios of 66:1 incur a 6 to 8 week delivery. |
|||
Motor: |
10 mm diameter, 6-12 Vdc servo, brush type
(see Motor Specifications) |
||
Slide: | 53.94 mm x 28.55 mm Thru Hole | ||
Load Capacity
|
|||
Direct Top Load: | 1.1 kg (38.8 oz) | ||
Push: | 2.8 kg (98.8 oz) | ||
Vertically mounted: | 0.6 kg | ||
Slide Load: | 1.1 kg | ||
Pitch: | 115 oz-in (800 mNm) | ||
Roll: | 38 oz-in (270 mNm) | ||
Yaw: | 78 oz-in (556 mNm) | ||
Travel Ranges & Dimensions
|
|||
Model No.
|
Travel Range |
Stage Body (L x W x H) |
Weight
|
MM-5M-X | 25.4 mm | 140 x 67 x 13 (mm) |
220 g
|
MM-5M-XY | 25.4 mm | 140 x 140 x 26 (mm) |
440 g
|
MM-5M-XZ | 25.4 mm | 140 x 67 x 156 (mm) |
460 g
|
MM-5M-XYZ | 25.4 mm | 140 x 140 x 170 (mm) |
680 g
|
The information contained on this website is subject to change without notice. Critical dimensions or specifications should be verified with our technical support staff.