GENERAL DATA:
- Moment Load capacity: 3 oz-in
- Linear Travel: 5.0 mm
- Table Speed: 0.5 mm/sec and 1.1 mm/sec
- Body Size: 60.8 x 14.2 x 12.5 (mm)
- Weight: 28 grams
- Not vacuum compatible
When ordering multi-axis units the completed assembly will include all necessary braces, kits and hardware
GENERAL PRECISION:
- Repeatability: ±2 µm
- Accuracy: ±3 µm/25.4 mm
- Slider Backlash: ‹10 µm
View Schematic
Product Selector
NOTE: If viewing on a cell phone, landscape mode is recommended.
3D models available
|
Specifications: MM-1M
|
|||
|---|---|---|---|
| *Repeatability: | ±2 µm | ||
| *Homing Repeatability: | ±2 µm | ||
| *Accuracy (linearity): | ±3 µm | ||
| Speed (with 64:1 gearhead): |
0.5 mm/sec w/MC-CQ-STICK SRVO 1.1 mm/sec w/MC-CQ-B Controller |
||
| Slider Backlash: | ‹10 µm | ||
| Encoder Conversion (resolution): |
0.01654 µm per count with 64:1 gearhead
(download resolution data sheet) |
||
| *Encoder resolution but be added based on the gearhead ration: 64:1 add ±0.0165 µm | |||
| Wobble (max): | 10 µrad (No ball bearings) | ||
| Screw Pitch: | 0.3175 mm (80 TPI) | ||
| Linear motion per turn: | 0.3175 mm | ||
| Runout (max): | 2 µm | ||
| Gearhead Backlash: | ≤2.65 µm equivalent; can be compensated in software without overshoot | ||
| Motor: | 6 mm diameter, 4.5 Vdc servo, brush type (MTR-6-50E-4.5v) | ||
|
Load Capacity
|
|||
| *Top or side load: | 0.25 kg (8.8 oz) | ||
| *Push | 0.5 kg (17.6) | ||
| **Return Force ext-comp.: | 0.23 (8 oz) to 0.45 kg (16 oz) | ||
| *Pitch: | 1.42 oz-in (10 mNm) | ||
| *Roll: | 2.97 oz-in (21 mNm) | ||
| *Yaw: | 1.42 oz-in (10 mNm) | ||
|
*These stages may be run at twice the
specified ratings without damage,but with a
loss of accuracy and speed. **Retract is limited by the preload spring. Notes: A pinion gear ratio of 1.5 is included in the gear train. In combination with the motor gearhead, this results in an effective gearhead ratio of 96:1 |
|||
|
Travel Ranges & Dimensions
|
|||
|
Model No.
|
Travel Range |
Stage Body (L x W x H) | Weight |
| MM-1M-X | 5 (mm) | 60.8 x 14.2 x 12.5 (mm) | 28 g |
| MM-1M-XY (2 axis) | 5 (mm) | 60.8 x 60.8 x 25 (mm) | 57 g |
| MM-1M-XZ (2 axis) | 5 (mm) | 60.8 x 14.2 x 70 (mm) | 62 g |
| MM-1M-XYZ (3 axis) | 5 (mm) | 60.8 x 60.8 x 82.7 (mm) | 90 g |
The information contained on this website is subject to change without notice. Critical dimensions or specifications should be verified with our technical support staff.